WEICON RK-1500 Acrylate Structural Adhesive | 2,12 oz | Transparent | with activator

WEICON RK-1500 Acrylate structural adhesive transparent 60 g with activator PROPERTIES: The low viscosity structural adhesive RK-1500 from WEICON has high impact, peel and shear strengths. The system consists of an adhesive and an activator, which are used in the No-Mix process. This simplifies processing by eliminating mixing processes. Due to its low viscosity, RK-1500 is particularly suitable for processing on large adhesive surfaces. The transparent adhesive is fast-curing and high-strength, which makes it particularly suitable for bonding glass, metal and ceramics, both with and among each other. PROCESSING: The adhesive is applied only on one side and usually on the surface which is not coated with activator. The thickness of the adhesive joint can be up to 0.80 mm (only with activator application on both sides). For adhesive joints of 0.15 mm to 0.25 mm thickness, the highest tensile shear strengths are obtained. Processing should be carried out at room temperature (approx. +20°C). Higher temperatures, e.g. +40°C, shorten the positioning and curing times by approx. 30%; lower temperatures by +10°C increase the respective times by approx. 50% until almost no reaction occurs from +5°C onwards. STORAGE: WEICON RK construction adhesives have a shelf life of at least 12 months at a constant room temperature of approx. +20°C and dry storage, while at temperatures of +1°C to 7°C the shelf life can be extended to up to 24 months. This applies to sealed original containers which are not exposed to direct or indirect sunlight. If the storage temperature exceeds +40°C and the humidity is high, the storage stability is reduced to 6 months.

• CHARACTERISTICS - WEICON RK-1500 is a low viscosity, high strength adhesive which dries yellowish transparent and fast curing. It is characterised by high impact, peel and shear strength.
• DETAILS - The system consists of an adhesive and an activator, which are used in the No-Mix process. Thanks to its low viscosity, it is perfect for processing large adhesive surfaces.
• APPLICATION - The transparent adhesive is particularly suitable for bonding glass, metal and ceramics. Applicable in mechanical engineering, metal construction, vehicle construction etc.
• QUALITY - 100% German Quality - The all-round spray meets the highest quality requirements while complying with physical, safety, toxicological and ecological regulations.
• PROCESSING - Apply adhesive on one side of the surface not coated with activator. The highest tensile shear strengths are obtained with adhesive joints of 0.15 - 0.25 mm (max. 0.8 mm) thickness.