R7847A1082 Honeywell Flame Amplifier, Rectification., FFRT: 2,3sec.R7847 A 1082

Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules. Features Flame failure response time of 0.8 or 3.0 seconds. Flame signal strength ranges from 0.0 to 5.0 Vdc. Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation. Flame signal test jacks to measure amplifier flame signal voltage. Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure. Compatible with existing Honeywell flame detectors (order separately). Product Specifications CommentsColor: GreenApprovals, Underwriters Laboratories Inc.Listed: File No. MP268, Guide No. MCCZApprovals, Canadian Standards AssociationCertified: File No. LR95329-3Flame Failure Response Time (sec)2.0 sec or 3.0 secApprovals, Swiss REAcceptableApprovals, Factory MutualApproved: Report No. 1V9A0.AFTypeRectificationSelf CheckingNone (standard)Use With Primary Safety Control7800 SERIES Relay ModulesUse With Flame SensorGas: Rectifying Flame Rods C7004,5,7,8, or 9, Q179 for impedance matching for leadwire runs > 50' or Ultraviolet Flame Sensor C7012A, C

• Flame failure response time: 2.0 or 3.0 seconds
• Use with Purple Peeper C7012A,C UV rectification flame detectors and C7004, C7005, C7007, C7008, C7009 and Q179 rectifying flame rods with leadwire runs greater than 50 feet
• Color code: Green