CTA Tools 3881 Crankshaft Front Oil Seal Installer - Compatible with BMW B37, B47, B48, B57, B58, N47 & N57
Product details
| Management number | 212747803 | Release Date | 2026/04/06 | List Price | $51.48 | Model Number | 212747803 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Replaces front crankshaft seal on BMW B37, B47, B48, B57, B58, N47 & N57 engines Components: 3881X01 – Press Sleeve, 3881X02 – Guide Tool, 3881X03 – Nut & 3881X04 – Screws Compare to BMW Factory Tool 118 800 Instructions 1. Using the Guide tool (3881X02), clean off the contact rim and coat with fresh engine oil. a. Secure the Guide tool (3881X02) with the screws (3881X04) to the crankshaft. 2. CAUTION! - Make sure all components are properly aligned prior to installation of seal. a. Carefully slide the crankshaft seal over the Guide tool (3881X02) in a straight and rotational movement until it is aligned with the crankcase. 3. Position the Press Sleeve (3881X01) over the Guide tool (3881X02). a. Carefully hand-tighten the Nut (3881X03) to ensure the seal lines up correctly. 4. After inspection of the seal and all components, begin tightening the Nut (3881X03) until the seal sits flush with the crankcase. CAUTION! - Do NOT overtighten and damage the seal. a. Seal is now properly installed. Carefully remove all 3881 components.
- Replaces front crankshaft seal on BMW B37, B47, B48, B57, B58, N47 & N57 engines
- Components: 3881X01 – Press Sleeve, 3881X02 – Guide Tool, 3881X03 – Nut & 3881X04 – Screws
- Compare to BMW Factory Tool 118 800
| Brand | CTA Tools |
|---|---|
| Model | CTA Tools 3881 Crankshaft Front Oil Seal Installer - Compatible with BMW B37, B47, B48, B57, B58, N47 & N57 |
| Exterior | Brushed |
| Item Weight | 1.09 pounds |
| Manufacturer | CTA Tools |
| Item model number | 3881 |
| Package Dimensions | 4.41 x 4.41 x 4.33 inches |
| Manufacturer Part Number | 3881 |
Bestseller ranking
Crankshaft
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form