1030NP High Power Inverter Ultrasonic Inverter Digital Inverter Head IGBT

This machine can overcome the charger to the battery undercharge overcharge, can increase the number of times the battery is charged and discharged, and extend the battery's service life. Input Voltage: 12 VDC nominal range (9.8-14V/DC) Input current: 10-120 amps Output Voltage: Pulsed 900V/AC Output power: 3000W max (peak) (1500W operating) Pulse width: 1%-12% adjustable Output frequency: 20-100 Hz adjustable Output waveform: Sine wave Battery: 12 V DC (any model) (not included) Battery life: 27Ah Overload protection: Yes (120A) Low voltage protection: Yes (less than 9V/DC protection) High voltage protection: Yes (over 15V/DC protection) Overheat protection: 85℃ It is strictly prohibited to cool air holes or air machine blocking machine stop state to continue to use. It is strictly prohibited to rainwater from entering the machine to avoid the cost of machine damage and safety accident. Connection method Because this machine has a large current, it should be connected to the socket first and then the battery. Charging 12V battery 12V indicator light will be on, and similarly charging 24V battery 24V indicator light will be on. (1) The red wire is connected to the + pole, and the black wire is connected to the - pole, and the reverse short-circuit charger will alarm and start the protection function. (2) Automatic conversion of 12V and 24V without manual adjustment. 2. The machine is strictly prohibited to input voltage above 260V for the power supply. 3. Customers should always check whether the ventilation holes on the battery cover are breathable. 4. This machine is a pure DC pulse appliance, as the current gradually becomes smaller after the charging indicator goes off, the bubble in the battery liquid will gradually become less and less is normal.

• Battery power display function, anti-reverse connection protection, reverse connection alarm prompt.
• Automatic charge regulator (ARC) to protect the battery. Over-current automatic protection and battery diagnostic function.
• Short-circuit automatic protection. Overheat automatic protection.
• Automatic protection of current limitation. Battery full saturation function.
• According to the size of the battery (4AH to 200AH) charging: automatic current conversion automatic adjustment. The use of this machine should be noted: the machine can not be used in flammable and explosive occasions